Technical Information PTFE Spray

Technical Information PTFE Spray

presto PTFE Spray (universal lubricant) is a high-quality synthetic all-purpose lubricant with powerful moisture and rust repellent properties. This high-performance lubricant dries leaving no residue.

For use on:

  • Car: door hinges, sunroof, locks, window guides, antennae, chains, electric wiring
  • Mopeds, bicycles: gear chain, rims, pedal shafts
  • Boats, caravans: wiring, sliding doors, tools

Quality and properties

  • Prevents wear and clamping on the treated parts
  • Low friction coefficiency
  • Excellent adhesion
  • High creeping capability
  • Excellent mechanical and thermo stability
  • Resistant to weak acids and alkalines
  • Silicone free
  • pH-neutral
  • Protects from corrosion
  • Very fine structure (particle size: ca. 5 micrometres)
  • Resistant to the effects of weather
  • Water repellent
  • Directed jet spray
  • This product has a special cap containing a tube and a spray head, which can be used to reach tricky places
  • TRG 300 compliant

Physical and chemical data

  • Basis: mineral oil and PTFE (Polytetrafluorethylene)
  • Colour: white-transparent
  • Smell: characteristic
  • Relative density at 20°C: 0.88 g/ml
  • Yield: 1.34 g/sec.
  • Vapour pressure at 20°C: 3 - 4 bar
  • 4 Ball EP-test (AS TM D 2596): 3430 N
  • 4 Ball Wear-test (AS TM D 266): < 0,4 mm
  • Temperature resistance: -50°C to +250°C
  • pH-value: neutral
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 400 ml

Environment and labelling

Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application:

  • Bring can to room temperature.
  • Operating temperature 5° to 30°C.
  • Remove moisture, dirt and grease from parts to be sprayed.
  • Shake can for 2 minutes before use.
  • Apply in fine even coats. Optimum lubrication is achieved once the solvent has evaporated.
  • Shake can from time to time during use.

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

There are no prdocuts to show.

Examples for use

Technical Information PTFE Spray
Technical Information PTFE Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of March 12, 2014
This release replaces all eventually earlier issued versions.

NIEUWS

Vorig jaar vond de opening van ons Experience Center in Wolvega plaats. Deze nieuwe locatie aan de overkant van het hoofdkantoor in Nederland is de...

Meer lezen

IDEEËN

Hier kunt u gestileerde muurschilderingen in blad-patroon maken. De truc: de bladen worden niet geschilderd maar erop gespoten met stencil...

Meer lezen

Hier kunt u gestileerde muurschilderingen in blad-patroon maken. De truc: de bladen worden niet geschilderd maar erop gespoten met stencil...

Meer lezen