Technical Information Textile Spray

Technical Information Textile Spray

Acrylic-based spray paint for textile decorations and creations. Highest colour brilliance. After drying limited washing at 30°C (delicates program, from left side). No additional fixation necessary. Very good coverage and light resistance for indoor and outdoor applications. Ideal for combination with stencil technique.

Quality and properties

  • Acrylic lacquer with special solvent
  • Excellent adhesion on textiles
  • Good flow, smooth surface
  • Quick and even drying
  • Resistant to wiping
  • Highest colour brilliancy
  • No further fixation necessary
  • Very good coverage and good light resistance for interiour and exterior applications
  • After drying limited washing at 30°C (delicates programm, from left side).
  • Not suitable for workaday clothes

Physical and chemical data

  • Basis of the binder: Acrylate co-polymeres
  • Colour: diverse
  • Smell: solvent
  • Efficiency:
    Depending on consistence and colour of the ground:
    150 ml are sufficient for approx. 0.4 m² depending on colour
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Dry to touch: after approx. 30 minutes
    Cured: after approx. 24 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant: up to 80°C
  • Wash-resistance:
    After drying limited washing at 30°C (delicates programm, from left side).
    Not suitable for workaday clothes!
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: aerosol cans, maximum nominal volume 150 ml

Environment and labelling

Environmentally sound: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

  • The textile you want to spray on has to be clean and dry.
  • Carefully mask off the areas you do not want to paint!
  • Protect the surroundings from spray mist.
  • Before use, shake the can for approx. 3 minutes.
  • Test the spray at an invisible spot.
  • Apply the motif by spraying several thin layers.
  • Spray from a distance of approx. 25 cm.
  • Dust-dry after approx. 10 minutes, cured after approx. 24 hours.

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

Products: The subpart part marker ###ITEM_LIST_EMPTY### or the template file EXT:snet_tmpl_motip/Resources/Private/Templates/Extensions/tt_products/products_template_en.tmpl has not been found.

Examples for use

Technical Information Textile Spray
Technical Information Textile Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of: October 27, 2011
This release replaces all eventually earlier issued versions.