Technical Information Cockpitspray
Spray with excellent cleansing properties, to clean, protect and embellish the dashboard and other plastic parts in the car. presto Cockpit-Spray affects long-lasting, anti-static, water and dirt repellent, thus reducing your maintenance costs.
Especially for cleaning is excellent, the water-based super foam spray that leaves even on windows no residue.
Physical and chemical data
- Colour: highgloss, semi-gloss: transparent / Superfoam: white foam
- Smell: Citrus
- pH-value: Superfoam: 10
- VOC-Content: highgloss, semi-gloss: Approximately 96% w/w / Superfoam: Approximately 10% w/w
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) - Size:
aerosol can, maximum nominal volume 600 ml
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Application "highgloss / semi-gloss":
- Bring the can to room temperature / Operational temperature 5 to 30°C.
- Shake before use.
- Apply the Cockpit-Spray on a dry, clean cloth and distribute evenly over the surface to be treated.
- Then, polish with a dry cloth until a gloss has been achieved.
- In view of decreased grip, avoid contact with the steering wheel and the control pedals.
Application "Superfoam":
- Bring the can to room temperature / Operational temperature 5 to 30°C.
- Shake before use.
- Switch off electrical installations before treatment.
- Apply the cockpit spray and allow to take effect so the foam can break.
- Then polish with a dry cloth
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of: January 10, 2014
This release replaces all eventually earlier issued versions.
