Technical Information clean "invisible glove"
presto Invisible Glove is developed to protect your hands from contamination, such as oil, lacquers and paints, mastic, glue, adhesive, polyurethane foam etc.
Very suitable to protect from soiling while working in
- Garages and workshops,
- Printer shops,
- Chassis construction,
- Paint-processing industry,
- Construction, miscellaneous industry etc.
Physical and chemical data
- Ingredients: Aqua, Glycerin, Sodium Silicate, Sodium Tallowate, Ceteareth-25, Paraffin, Sodium Cocoate, Sodium Hydroxide, Sodium Chloride, Tetrasodium Glutamate, Diacetate, Sodium Thiosulfate, Parfum
- Colour: white
- Smell: almondy
- Density at 20°C: aprox. 0.4 g/cm³
- Storage stability:
30 months in the original, unopened container, proper storage conditions provided (=10°-25°C, relative air humidity max. 60%) - Container / size:
65o ml plastic box
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Application
- Wash your hands and dry thoroughly.
- Rub onto the palm of the hand and let dry briefly.
- After work, the dirty hands can easily be cleaned under running water.
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of March 21, 2018
This release replaces all eventually earlier issued versions.
