Technical Information Exhaust Assembly Paste

Technical Information Exhaust Assembly Paste

presto Exhaust Assembly Paste is a putty-like paste to seal joints in the field of exhaust systems, such as sleeves, terminals, clamps etc.

For the repair of wholes, cracks etc. in exhaust system we recommend presto Exhaust Repair Paste.

Quality and properties

  • Putty-like paste basing on water glass
  • For durable sealing of exhaust system parts
  • Quick and easy application
  • Ease of disassembling

Physical and chemical data

  • Basis: Water glass
  • Consistency: pasty
  • Colour: dark-grey
  • Smell: nearly without odour
  • Temperature resistance: up to approx. 700°C
  • Processing temperature:
    +5°C - +30°C, best results during room temperature
  • ph-value: 9.8
  • Density at 20°C: 1.68 kg/dm³ ± 0.02 kg/dm³
  • Solid content: 71 ± 1 %
  • Storage stability:
    12 monts if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    60 g and 170 g tube

Environment and labelling

Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application:

  • The substrate has to be clean and fat free.
  • The paste can be applied generously onto the spots to be treated, then the parts can be assembled immediately.
  • Hardening will happen after starting the vehicle in the usual way by means of heating.
 

Order informations

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

There are no prdocuts to show.

Examples for use

Technical Information Exhaust Assembly Paste
Technical Information Exhaust Assembly Paste

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of August 24, 2010
This release replaces all eventually earlier issued versions.

NIEUWS

Vorig jaar vond de opening van ons Experience Center in Wolvega plaats. Deze nieuwe locatie aan de overkant van het hoofdkantoor in Nederland is de...

Meer lezen

IDEEËN

We hebben allemaal mooie oude meubelstukken liggen. En, het is het waard om eens een kijkje te nemen in de kasten van je grootouders, of ooms en...

Meer lezen

De ideale en goedkope manier om zeer sterke en hittebestendige metalen schakels te repareren met presto kleefstaal.

 

Ook geschikt voor gebruik op: ...

Meer lezen