Technical Information Brake Cleaner barrel
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Application:
Operating temperature 5° to 30°C.
Fill brake cleaner in a pump sprayer or apply on cloth.
Evenly spray onto the surface to be treated or rub in, till the dirt is dissolved.
Use a brush on stubborn dirt.
Alternatively the parts can be dipped or cleaned with brush. After cleaning the parts must dry on air or wipe off with a clean cloth.
Turn off conducting parts and electrical equipment before application and turn on approx. 15 minutes after treatment (brake cleaner contains flammable solvents).
May not reach directly in the waste water; separation over oil separators
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of July 4, 2011
This release replaces all eventually earlier issued versions.