Technical Information Synthetic Adhesive Lube

Technical Information Synthetic Adhesive Lube

presto Synthetic Adhesive Lube is a spray grease for lubrication of metal and plastics mechanical parts. By the excellent mechanical and thermal stability prevent wear and sticking of joints. The spray suppresses noises and provides good for corrosion.

Application areas:
joints, hinges, door locks, etc.

Quality and properties

  • Prevents wear and sticking
  • Excellent adhesion and creep power
  • Suppresses noises
  • High viscosity
  • O-ring neutral, i.e. does not attack seals
  • Good corrosion resistance
  • Excellent mechanical and thermal stability
  • Leaves a sticky surface
  • Extremely weather resistant
  • Resistant to salts, dilute acids and alkalis
  • Water-repellent
  • Contains PTFE
  • Directed jetspray
  • This product is equipped with a special cap. The cap contains a tube and a spray nozzle for directed application in inaccessible places.
  • Attend the TRG 300

Phsysical and chemical data

  • Basis of the binder: calcium-grease
  • Colour: white
  • Relative density at 20°C: 0,665 g/ml
  • Vapour pressure at 20°C: 3 - 4 bar
  • Drop point: 42°C to 60°C
  • Temperature resistance: -30°C till +180°C
  • pH-value: neutral
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol cans, maximum nominal volume 400 ml

Environment and labelling

Environmentally sound: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application

  • The aerosol should have room temperature.
  • Best processing temperature 5 to 30°C.
  • Before application we recommend the cleaning with presto Assembly Cleaner.
  • Shake can thoroughly before use.
  • Synthetic Adhesive Lube apply on all parts which shall be treated.
  • After the evaporation of the solvent a soft, extremely adhesive lubricant film develops.
 

Order informations

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

Products: The subpart part marker ###ITEM_LIST_EMPTY### or the template file EXT:snet_tmpl_motip/Resources/Private/Templates/Extensions/tt_products/products_template_en.tmpl has not been found.

Examples for use

Technical Information Synthetic Adhesive Lube
Technical Information Synthetic Adhesive Lube

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of April 4, 2011
This release replaces all eventually earlier issued versions.

NIEUWS

Vorig jaar vond de opening van ons Experience Center in Wolvega plaats. Deze nieuwe locatie aan de overkant van het hoofdkantoor in Nederland is de...

Meer lezen

IDEEËN

Hier kunt u gestileerde muurschilderingen in blad-patroon maken. De truc: de bladen worden niet geschilderd maar erop gespoten met stencil...

Meer lezen

Tot nu toe konden afgescheurde scharnieren van deuren, dressoirs, schappen en kastjes enkel door professionals hersteld worden…

 

Ook geschikt voor:...

Meer lezen