Technical Information Freezer Spray

Technical Information Freezer Spray

presto Freezer Spray is a highly effective aid to remove severe rust and jam from joints e.g. screws, nuts, bolts and crankshafts. Special components create a short-term “cold shock” on the rusted tools, which shrinks them.

Quality and properties

    • Works in seconds
    • Free from fat and silicone
    • To avoid damage by heat during soldering
    • Short-term cold shock -50°C
    • Leaves no residue
    • Directed jet spray
    • Can be sprayed from any angle due to a special 360° valve.
    • TRG 300 compliant

Physical and chemical data

  • Basis: Aliphatic Hydrocarbons
  • Colour: brownish-transparent
  • Smell: Vanilla
  • Relative density at 20°C: 0.65 g/ml
  • Yield: 1.92 g/sec.
  • Vapour pressure at 20°C: 3 - 4 bar
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 400 ml

Environment and labelling

Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application:

  • Bring can to room temperature.
  • Operating temperature 5° to 30°C.
  • Shake can before use.
  • Spray the screws with several short sprays for several seconds.
  • The fast temperature drop means screws can be loosened.
  • Do not spray on skin or body parts!

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

There are no prdocuts to show.

Examples for use

Technical Information Freezer Spray
Technical Information Freezer Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of: October 8, 2012
This release replaces all eventually earlier issued versions.