Technical Information AQUA
The environmental-friendly spray paint - 90 % of the solvents have been replaced by water.
High-gloss and matt colours as well as a primer in a new, quick-drying quality. Even suitable for outdoor objects. For nearly all surfaces: for the lacquering of kitchen and bathroom accessories, gardening tools and garden furniture, children’s rooms and toys etc. made of wickerware, wood, carton, metal, fabric, paintable hardplastics, glass, ceramics, etc. Even suitable for use on polystyrene. The lacquered objects can be cleaned with a mild dishwashing detergent.
From translucent to cover coat - you decide about the depth of colour!
Here you find a video spot.
Quality and properties
- High-quality acrylic lacquer, waterbased
- Less spray mist, therefore pleasant usage even indoor
- Suitable for polystyrene
- Pleasant vanilla scent, no odour of solvent
- Light-proof
- Durable gloss
- Hard-wearing, resiliant surfaces
- According to DIN EN 71-3 suitable for the painting of toys.
- Flaws made during the spraying can be corrected within 20 - 25 minutes after application. Within this space of time the „open“ paint layer can be washed off with water and soap.
- Also suitable for outdoor applications
- Self-cleaning valve
- Available in many colours, as primer and as high gloss and matt clear coat.
Physical and chemical data
- Basis: Acrylic, water-based
- Appearance/smell: Pleasant vanilla scent during spraying.
- Degree of gloss: measuring angle 60° after DIN 67530
High gloss shades: 80 gloss units
Satin gloss shades: < 45 gloss units
Matt shades: <15 GE measuring angle 60° after DIN 67530 - Efficiency:
Depending on condition and colour of the ground, 350 ml
Primer are sufficient for approx. 0.8 - 1.0 m²
Colours are sufficient for approx. 0.8 - 1.2 m²
Clear Lacquer are sufficient for approx. 1.0 - 2.0 m² - Drying (at 20°C, 50% relative air humidity):
Dust-dry: after 15-20 minutes
Dry to touch: after 2 hours
Re-coatable / cured after 24 hours
The final surface hardnes is achieved after approx. 5 days. During this period the painted object should not be exposed to permanent wetness.
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. - Disposal: Put only empty cans into the recycling bin. Bring cans with remainders of paint to the special refuse disposal.
- Storage stability:
4 years if appropriate storage provided (=10°-25°C, relative air humidity max. 60%).
Sedimentation: has not been noticed.
Store frost-protected! - Content: Max. nominal volume = 400 ml (with 350 ml filling)
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Using instructions
The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!
Preparation:
The surface must be clean, absolutely fat-free and dry. Remove loose parts. In spite of low formation of spray mist, we recommend to protect the surrounding area. Pre-paint absorbent grounds with AQUA Primer. Let dry (at least 2 hours). Prime hardplastics with a Plastic Primer.
Lacquering:
Shake can for 3 minutes, test spray. The optimal distance is approx. 25 cm. Spray in 2 minute intervals several thin layers. AQUA spray paint should not be applied during temperatures lower than 15°C, as this might delay drying time.
Tips for spray painting
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
Order numbers
| Color | Product | Bundle | Art.No. |
 |
Aqua altweiss sdm. 350 | 350 ml | 373923 |
 |
Aqua anthr.grau 7016 sdm. 150 | 150 ml | 476518 |
 |
Aqua anthrazit sdm. 350 | 350 ml | 373909 |
|
Aqua anthrazitgrau7016 gl. 350 | 350 ml | 246289 |
 |
Aqua beige sdm. 350 | 350 ml | 373862 |
 |
Aqua blutorange 2002 gl. 350 | 350 ml | 252457 |
 |
Aqua cremeweiss 9001 gl. 150 | 150 ml | 476600 |
|
Aqua cremeweiss 9001 gl. 350 | 350 ml | 252532 |
|
Aqua cremeweiss 9001 sdm. 150 | 150 ml | 476426 |
 |
Aqua dunkelgrau sdm. 350 | 350 ml | 373893 |
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
Status: October 1, 2013
This release replaces all eventually earlier issued versions.
