Technical Information MPL 20

Quality and properties

    • Good penetration
    • Removes oil, grease, wax, Tectyl and tar from metal and rubber parts
    • Cleaning effect
    • Good corrosion protection
    • Moisture repellent
    • An invisible protective film remains after cleaning 
    • Directed jet spray
    • This product has a special cap containing a tube and a spray head, which can be used to reach tricky places
    • TRG 300 compliant

Physical and chemical data

  • Basis: mineral oil
  • Colour: brownish
  • Smell: Vanilla
  • Relative density at 20°C: 0.80 g/ml
  • Yield: 1.98 g/sec.
  • Vapour pressure at 20°C: 3 - 4 bar
  • Temperature resistance: -50°C to +200°C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 400 ml

Environment and labelling

Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Instruction manuel

Before use, carefully read and observe the warning texts on the label!

Application:

  • Bring can to room temperature.
  • Operating temperature 5° to 30°C.
  • Shake can for 2 minutes before use.
  • Cover coated or plastic parts with masking tape.
  • Spray MPL 20 evenly on the surface to be treated.
  • Optimum lubrication occurs once the solvent has evaporated.

 

.

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

 Color   Product   Bundle   Art.No. 
 MPL 20 Hochlei.schmierfett 400   400 ml   000578 

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of: November 26, 2009
This release replaces all eventually earlier issued versions.

NIEUWS

Vorig jaar vond de opening van ons Experience Center in Wolvega plaats. Deze nieuwe locatie aan de overkant van het hoofdkantoor in Nederland is de...

Meer lezen

IDEEËN

Deze magische lantaarns zullen heel wat aandacht krijgen. Je vindt gelijkaardige decoraties die echte blikvangers worden met wat kleur op...

Meer lezen

We hebben allemaal mooie oude meubelstukken liggen. En, het is het waard om eens een kijkje te nemen in de kasten van je grootouders, of ooms en...

Meer lezen